The short version

A Brighton homeowner had just moved to fiber, was sitting on a pile of carrier hardware and an older mesh system he hoped to reuse, and wanted to know whether it was worth running wire through a finished 2,500 square foot house.

The Sound Vision priced both honestly. He chose the eero Pro 7 mesh rather than pay for the patch and repair work a hardwired network needs, and understood exactly what he was giving up.

What he did not give up was uptime. A WattBox 250 on the modem and the first node reboots the connection on its own when the internet drops. See how we design home networks, or call 248-804-8011.

At a Glance

Town
Brighton, MI
Project Type
Mesh Wi-Fi network, 2,500 square foot home
Timeline
One visit
Systems
Network design, eero Pro 7 mesh, self healing power management
Investment Range
$2,000 to $4,000
Price your own network
White eero Pro 7 node on a cane fronted desk beside an open laptop in a blue home office
An eero Pro 7 node on a desk. Nodes go where the people are, which in a house without new wire is the whole design. Manufacturer photograph.

What the Homeowner Wanted

A Brighton homeowner found The Sound Vision the way a growing number of people now do, through an AI search rather than a referral or a sign on a truck. He had a specific problem and a specific question.

The problem was that his house had just been switched to fiber, and it did not feel like it. The question was whether he should run wire through a finished 2,500 square foot home to fix that, or whether a better mesh system would be enough.

That is a fair question and it does not have one answer. It has a tradeoff, and he wanted the tradeoff explained rather than a product recommended.

The Challenge: New Service, Old Hardware, and a Real Decision About Wire

The fiber installation had left the house with a mix of new and older equipment, some of it supplied by the carrier and some of it left over from the previous service. On top of that the owner had an older mesh system he was hoping to repurpose. Three generations of networking gear were in the same house, and more than one of them thought it was in charge.

That is the most common reason a new fiber connection does not feel faster than the old cable one. The speed arrives at the house and then passes through hardware that was never meant to carry it, or through two routers doing the same job in series.

The wire question was the bigger one. A hardwired backhaul, an access point on a cable in each part of the house, is the right answer far more often than not. It also means opening a finished ceiling, then patching, sanding and painting it, and in a 2,500 square foot home the repair work can cost more than the network. The Sound Vision priced it both ways and said so plainly.

The Build: A Mesh That Puts Itself Back Together

He chose the mesh. The house now runs on an eero Pro 7 system, with nodes placed against the floor plan rather than dropped wherever an outlet happened to be free. The redundant carrier hardware came out of the path, so one device is in charge of the network and nothing downstream is fighting it.

The part that matters most is what happens when nobody is home. A wireless backhaul depends on the internet connection staying up, and a modem or a router that locks up stays locked up until somebody unplugs it. So the head of the system runs on a WattBox 250 Series surge protector, with the modem on one controlled outlet and the main router and first mesh node on the other.

When the connection drops, the WattBox sees it, cycles the modem, waits, and then cycles the router in sequence rather than dropping both at once. That order matters: a modem needs to be back and talking to the carrier before the router tries to reach it. Most of the outages that used to become a phone call now clear themselves in a few minutes with nobody in the house.

That is the piece The Sound Vision does not leave out, whichever way the wire decision goes. A system that fixes itself is worth more than a system that is slightly faster on paper.

The Result: A Tradeoff Made With Open Eyes

The house works. Coverage holds across 2,500 square feet, the fiber service is actually reaching the devices now that nothing is doubled up in front of it, and the owner knows exactly what he traded away and why.

That last part is the whole point of the sales process. He was not sold a mesh system. He was shown what wire buys, what it costs to put a finished house back together afterward, and what a mesh can and cannot do, and he made the call. If he ever decides the wire is worth it, the design already knows where those runs would go.

If you are weighing the same decision, the home networking page covers how The Sound Vision approaches it, and the Birmingham project shows what the wired answer looks like in an older house.

What would a network like this cost in your house?

The budget tool walks through the size of the house, how many floors, what the walls are made of and what else you want the network to carry, and gives you a real range in about two minutes. No sales call to get a number.

Open the Home Technology Budget Calculator Looking at something different? Try the Home Theater Budget Tool.

System Overview

Room or ElementWhat Is In ItBrands
Wirelesseero Pro 7 mesh nodes placed against the floor planeero Pro 7
HeadendModem and the main router and first mesh nodeNetgear Nighthawk 2500, eero
Power and uptimeTwo individually controlled outlets: the modem on one, the router and first node on the other, with a sequenced reboot when the internet dropsWattBox 250 Series
ServiceNew fiber service, with the redundant carrier hardware taken out of the pathFiber carrier
Remote supportThe system is monitored remotely, so most faults are seen before a call comes inOvrC

Project Details

The Project

  • Location: Brighton, Michigan
  • Size: approximately 2,500 square feet
  • Starting point: a new fiber service, carrier hardware, and an older mesh system the owner hoped to reuse
  • Decision: mesh rather than hardwired, made deliberately to avoid patch and repair work
  • Protection: WattBox 250 on the modem and the first mesh node
  • Relationship: new client, found The Sound Vision through an AI search

The Team

  • System design and installation: The Sound Vision
  • Relationship: new client
  • How they found us: an AI search

Equipment Specified

  • eero Pro 7 mesh Wi-Fi system
  • WattBox 250 Series Wi-Fi surge protector on the modem and the first mesh node
  • Netgear Nighthawk 2500
  • New fiber internet service, with the carrier hardware sorted out and the redundant pieces removed
  • Remote monitoring through OvrC

Frequently Asked Questions

How much does a mesh Wi-Fi network cost for a 2,500 square foot house?

A professionally designed and installed mesh network in a house that size generally runs $2,000 to $4,000, depending on how many nodes the floor plan needs and what has to happen at the internet connection. Adding new wire runs pushes it higher, because the labor and the patch and repair work cost more than the hardware does. The home technology budget calculator will put a range on your own house in about two minutes.

Is a hardwired network worth the patch and repair work?

Usually yes, and not always. Wire gives every access point a full strength connection back to the internet, which is the single biggest thing you can do for a large or older house. It also means opening ceilings and walls that then have to be closed, patched and painted, and in a newer home with an open plan the gain can be smaller than the disruption. The right answer depends on the house and on what the owner is willing to live through. This Brighton homeowner weighed both and chose the mesh, with his eyes open.

What happens to my Wi-Fi if the internet drops while I am away?

On its own, nothing. The modem or the router sits there in a failed state until somebody unplugs it, which is no help if you are travelling or working from another building. The Sound Vision puts a WattBox on the modem and the main router so the system watches the connection and power cycles the modem first, then the router, in sequence, without anybody touching it. Most outages that would have become a service call clear themselves before the owner notices.

Do I need new equipment when I switch to fiber?

Sometimes, and less often than you are told. A fiber install usually leaves behind carrier supplied hardware, and the older router or mesh system is often still in the loop doing a job it no longer needs to do. That doubling up is a common cause of a new fiber connection that does not feel any faster. The fix is to decide which single device is in charge of the network and take the rest out of the path.

Who installs home networks in Brighton, Michigan?

The Sound Vision is a CEDIA certified home technology integrator working in Brighton, Livingston County and across Oakland County. Projects range from a single network refresh to whole home smart systems, the technicians average more than 20 years of experience, and the average client relationship runs about 13 years.

New internet service that still does not feel fast?

The Sound Vision designs and installs home networks in Brighton, Birmingham, Bloomfield Hills, Franklin, Northville, Plymouth and across Metro Detroit. Tell us what your house is doing and we will tell you what it takes to fix it.

Talk to a person
248-804-8011

Monday to Friday, 9 to 6. You reach the people who design and install the work, not a call center.

Or send a message
  • This field is for validation purposes and should be left unchanged.

Have Questions? Get in Touch.

  • This field is for validation purposes and should be left unchanged.