Home / Case Studies / Birmingham Whole Home Retrofit
The short version

A Birmingham couple in a 1954 Cape Cod had reached the stage where the house is quiet most weeks and full the rest. Kids home from college, a game on downstairs, and three rooms that each worked a different way.

The Sound Vision brought all three onto one platform: Sonos joined to the Sonos already in the house, streaming in every room, new wire pulled without damage, and Crestron Home over the whole thing.

One remote, one app, one way of doing things in every room. Call 248-804-8011.

At a Glance

Town
Birmingham, MI
Project Type
Whole home AV retrofit, existing home, three rooms
Timeline
Three days on site, including training
Systems
Sonos audio, Crestron Home control, streaming video, power and network
Investment Range
$8,000 to $12,000
Price your own project
Black Sonos Beam soundbar on a walnut credenza beneath a wall mounted television showing a night sky
A Sonos Beam under a television. The family room got one with a Sub Mini behind it, and the gym got another. Manufacturer photograph.

What the Owners Wanted

This was a returning client. Two years earlier The Sound Vision had done a small job in the same Birmingham house, a network and a bit of audio video work, nothing elaborate. The house is a four bedroom Cape Cod built in 1954, and the owners are at the stage a lot of people in Birmingham are at: the kids are gone, and then they are not.

The lower level is where everyone ends up when they come home. A game on the big screen, people in and out, nobody sitting still. That room needed to be the good one.

Upstairs the ask was different and quieter. The everyday television needed to be easier to hear. Even a nightly newscast now carries an enhanced soundtrack, with music and effects mixed under the voices, and a flat panel firing its own speakers backward into a wall does that mix no favors. It is the sort of thing people put up with for years and then cannot believe they did.

Underneath both was the same complaint. Three rooms, three different ways of working, and the cable bill that nobody had looked at recently.

The Challenge: A Retrofit Works With the Wire That Is Already There

A house built in 1954 was not wired for this, and a finished house does not want to be opened up to fix that. There was some infrastructure already in place from previous work, which helps, and there were rooms it did not reach, which is the actual job.

New Cat6 and coax were pulled to the rooms that needed them, worked through the paths the house already had rather than through new holes in finished ceilings. Nothing was damaged getting there.

The honest part of this work is that no retrofit reaches every location with wire. There is always a room where the path does not exist and the cost of making one is not worth it. That is where the control platform matters, because Crestron Home and Control4 both have wireless components that carry control into those rooms. The room ends up behaving exactly like the wired ones, and the owner never knows which is which. An integrator who only has one answer will either open your ceiling or tell you that room cannot be done.

The work was quoted two ways, on Control4 and on Crestron Home, so the owners could compare the two platforms rather than be told which one they wanted. They chose Crestron Home.

The Build: Sonos Where the Sound Needed Help, Crestron Home Over All of It

The lower level media room was the room the family gathers in, so it got the screen upgrade. It already had Sonos in it from earlier work, and rather than replace that, the existing components were folded into the new system and put under Crestron control. A streaming player went in alongside them.

The gym got a television installed, a streaming player, sound, and a Strong articulating mount so the screen can be aimed at whoever is using the room. It went onto the same control platform as everything else.

The family room got more Sonos, a Sonos Beam with a Sub Mini behind it, and a new television sized to the niche it sits in. That is the everyday room, and it is the one where the dialogue problem actually got solved.

Streaming is deliberately boring. A Roku Ultra went into all three rooms, the same player everywhere, so every television in the house works the same way and every app sits in the same place. The house was left on cable at the end of the install, with the cord cutting set up and ready whenever the owners decide to make that call.

The Sound Vision does not use the apps built into the television, on any project. That is a support decision before it is a preference. Apple TV and Roku are two platforms, and their software and firmware can be tracked and kept current. The televisions in a house are several different models from several different years, bought one at a time, each running its own app versions on its own update schedule. When a client calls to say Netflix will not launch, that call is answerable in a few minutes when the answer lives on one of two devices, and it is an afternoon when it lives inside whichever television happened to be on sale that year.

Then the part nobody sees. A WattBox 250 Series surge protector went in at each equipment location and in the media room closet, so the streaming players and the network gear can be power cycled remotely rather than by hand. An Araknis eight port switch went into the closet and the cabling was reorganized so the next person to open that door can tell what is what.

Crestron Home ties all of it together. A wireless gateway, handheld remotes, the mobile app, and wireless control interfaces in the rooms the wire did not reach. One button starts a room. Three days on site, and the last day was spent on training rather than installing.

The Result: One House, One System

The three rooms are no longer three systems. Sonos carries the audio, Crestron Home carries the control, and every television behaves the same way whether it is the big screen downstairs or the one in the gym. One remote, one app, one set of habits.

The lower level does what it is supposed to do when the house fills back up, which is hold everybody in front of a game without anybody hunting for a remote. Upstairs, the everyday television is finally intelligible, which is the smallest line item on the invoice and the one they notice most.

And the cable boxes can go whenever the owners are ready. The streaming players are already in every room, so that is a phone call rather than another project.

If you are looking at the same thing in an existing house, the smart home automation page covers how The Sound Vision approaches control, and the case studies show more of the work nearby.

What would a retrofit like this cost in your house?

The budget tool covers how many rooms you want covered, what you want them to do and how far you want to take the control, and gives you a real range in about two minutes. No sales call to get a number.

Open the Home Technology Budget Calculator Looking at something different? Try the Home Theater Budget Tool.

System Overview

Room or ElementWhat Is In ItBrands
Lower level media roomScreen upgrade, streaming player, existing Sonos folded into the new system, protected powerRoku Ultra, Sonos, Crestron Home, WattBox
Family roomNew television sized to its niche, soundbar and subwoofer, streaming player, wireless gatewaySonos Beam Gen 2 and Sub Mini, Roku Ultra, Crestron
GymTelevision installed on an articulating mount, streaming player, sound, control interfaceRoku Ultra, Sonos Beam Gen 2, Strong
Equipment closetEight port gigabit switch, protected power, cabling reorganizedAraknis 110 Series, WattBox 250 Series
ControlHandheld remotes and the mobile app, wireless interfaces where new wire could not reach, one button per roomCrestron Home
CablingNew Cat6 and coax pulled to the rooms that needed it, no damage to finished spaceCategory cable

Project Details

The Project

  • Location: Birmingham, Michigan, in a four bedroom Cape Cod built in 1954
  • Rooms: family room, lower level media room, gym, plus the media room equipment closet
  • Type: retrofit into a finished home with partial existing wire
  • Starting point: a returning client from a small network and audio video job two years earlier
  • Control: quoted two ways, Control4 and Crestron Home, and the owners chose Crestron Home
  • Timeline: three days on site in June, with training on the last day

The Team

  • System design and installation: The Sound Vision
  • Relationship: returning client, second project
  • Time on site: three days, including a training day

Equipment Specified

  • Crestron Home control across all three rooms, with handheld remotes, a wireless gateway and the mobile app
  • Wireless control interfaces for the rooms new wire could not reach
  • Sonos Beam Gen 2 soundbars, joined to the Sonos equipment already in the house
  • Sonos Sub Mini
  • Roku Ultra streaming players, one standard platform in all three rooms
  • New television in the family room, sized to the niche it sits in
  • Strong articulating mount in the gym
  • WattBox 250 Series surge protectors at each equipment location and in the closet
  • Araknis 110 Series eight port gigabit switch in the media room closet
  • New Cat6 and coax runs pulled to the rooms that needed them

Frequently Asked Questions

What does a whole home audio and control retrofit cost in an existing house?

For three rooms brought onto one control platform, with audio, streaming, protected power and the network work behind it, most projects land between $8,000 and $12,000. A single room is far less, and a whole house with lighting and shades is a different scale of project entirely. The variable is almost never the equipment. It is how much new wire the house needs and how hard those paths are to reach. The home technology budget calculator will put a range on your own house in about two minutes.

Can you put a system like this in a finished house without tearing it up?

In most cases yes, and that is most of the skill. On this project new Cat6 and coax were pulled to the rooms that needed them without damage to the finished space, by working the paths that already existed rather than opening walls to make new ones. Where a room genuinely could not be reached with wire, the control platform has wireless components that do the same job, so that room behaves exactly like the wired ones. Ask any installer to walk you through the intended cable route, and what the plan is for the rooms the wire cannot reach, before anything is cut.

Why put a soundbar on a television that is only used for the news?

Because modern broadcast audio is mixed for surround, not for the two small speakers firing backward out of a flat panel. Even a nightly newscast now carries an enhanced soundtrack, with music and effects layered under the voices, and a thin television speaker pushes all of it into the same narrow band. The result is a television people keep turning up and still cannot quite follow. A soundbar separates the dialogue from everything underneath it, which is the single most useful upgrade in the house for anyone with hearing loss, and a noticeable one for everybody else.

Who does whole home audio and Crestron retrofits in Birmingham, Michigan?

The Sound Vision is a CEDIA certified home technology integrator working throughout Birmingham and Oakland County, with a great deal of the work in existing homes rather than new construction. The technicians average more than 20 years of experience and the average client relationship runs about 13 years. This project was a returning client from a much smaller job two years earlier.

Why not just use the streaming apps built into the television?

Because somebody has to support them a year later. Apple TV and Roku are two platforms, and their software and firmware can be tracked, tested and kept current. The televisions in a house are usually several different models bought several years apart, each running its own app versions on its own update schedule, and nobody can stay current across all of them. Standardizing every room on one streaming player means that when a client calls to say Netflix will not launch, the problem sits on a device The Sound Vision knows rather than inside a television nobody can predict. It also means the cable channels can move onto that same player later, through the provider’s own streaming app such as Xfinity Stream, so the rented boxes and the fee attached to them can go whenever the owners are ready.

Want the whole house on one system?

The Sound Vision retrofits existing homes in Birmingham, Bloomfield Hills, Franklin, Northville, Plymouth and across Metro Detroit. Tell us what is already in the walls and what you want the house to do, and we will tell you what it takes.

Talk to a person
248-804-8011

Monday to Friday, 9 to 6. You reach the people who design and install the work, not a call center.

Or send a message
  • This field is for validation purposes and should be left unchanged.

Have Questions? Get in Touch.

  • This field is for validation purposes and should be left unchanged.